APC Power-Saving Back-UPS Pro 550-0
APC Power-Saving Back-UPS Pro 550-53054

APC Power-Saving Back-UPS Pro 550

APC Power-Saving Back-UPS Pro 550

Povpraševanje
Šifra: APC Power-Saving Back-UPS Pro 550 Kategoriji: , Oznaka:

BR550GI Features

APC Power-Saving Back-UPS Pro 550

  • Audible alarms
    Provides notification of changing utility power and UPS power conditions
  • Automatic self-test
    Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Automatic Voltage Regulation (AVR)
    Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
  • Battery failure notification
    Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Battery replacement without tools
    Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
  • Battery-protected and surge-only outlets
    Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
  • Boost and Trim Automatic Voltage Regulation (AVR)
    Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
  • Cold-start capable
    Provides temporary battery power when the utility power is out.
  • Dataline surge protection
    Provides protection of connected equipment from power surges on the data lines.
  • Disconnected battery notification
    Warns when a battery is not available to provide backup power.
  • Green mode
    Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • Hot-swappable batteries
    Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • LCD graphics display
    Text and mimic diagrams that display modes of operation, system parameters and alarms.
  • Power-saving outlets
    Automatically cuts power to idle equipment to conserve electricity.
  • Safety-agency approved
    Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • USB connectivity
    Provides management of the UPS via a USB port (not available on all models).
  • User-replaceable batteries
    Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Back-UPS Pro Features & Benefits

Manageability
  • USB connection
    Use your PC to access additional power protection and management features for your UPS via a USB Port.
  • LCD Status Display
    Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
  • Audible alarms
    Provides notification of changing utility power and UPS power conditions
  • Disconnected battery notification
    Warns when a battery is not available to provide backup power.
Marketing Features
  • Battery-protected and surge-only outlets
    Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
  • LCD Status Display
    Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
  • Boost Automatic Voltage Regulation (AVR)
    Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
  • Energy Management Function
    Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.
  • Green mode
    Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Serviceability
  • Resettable circuit breaker
    Easy recovery from overloads; no need to replace a fuse.
  • Simple battery replacement
    Increases UPS availability by allowing quick, easy battery replacement.
Availability
  • Energy Management Function
    Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.
  • Customizable voltage-transfer points
    Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
  • Customizable voltage sensitivity
    Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
  • Boost and Trim Automatic Voltage Regulation (AVR)
    Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
  • Green mode
    Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • Automatic self-test
    Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Battery failure notification
    Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Cold-start capable
    Provides temporary battery power when the utility power is out.
  • Intelligent battery management
    Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Transformer-block spaced outlets
    Protect equipment with input transformer blocks without blocking access to other receptacles.
Protection
  • Surge only outlets
    Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
  • Battery and surge protected outlets
    Back up and protect your hardware and data during power outages, surges and spikes.
  • Dataline surge protection
    Provides protection of connected equipment from power surges on the data lines.
Safety
  • Safety-agency approved
    Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Output

  • Output power capacity

    330 Watts / 550 VA

  • Max Configurable Power (Watts)

    330 Watts / 550 VA

  • Nominal Output Voltage

    230V

  • Output Frequency (sync to mains)

    50 Hz

  • Topology

    Line Interactive

  • Waveform type

    Stepped approximation to a sinewave

  • Output Connections
    (3) IEC 320 C13 (Battery Backup)
    (3) IEC 320 C13 (selector_surgetitle)
  • Transfer Time

    6ms typical : 10ms maximum

Input

  • Nominal Input Voltage

    230V

  • Input frequency

    50/60 Hz +/- 3 Hz (auto sensing)

  • Input Connections

    IEC-320 C14

  • Input voltage range for main operations

    176 – 282 V

  • Input voltage adjustable range for mains operation

    155 – 290 V

  • Maximum Input Current

    6.0 A

Batteries & Runtime

Communications & Management

  • Interface Port(s)

    Optional Simple Signalling RS232 cable , USB

  • Control panel

    Multi-function LCD status and control console

  • Audible Alarm

    Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

  • Surge energy rating

    420 Joules

  • Data Line Protection

    Network line – 10/100/1000 Base-T Ethernet (RJ-45 connector)

  • Filtering

    Full time multi-pole noise filtering :10% of IEEE surge let-thgouh : zero clamping response time: instantaneous

Physical

  • Maximum Height

    190 , 19.0 cm

  • Maximum Width

    91 , 9.1 cm

  • Maximum Depth

    310 , 31.0 cm

  • Net Weight

    6.53 kg

  • Shipping weight

    7.71 kg

  • Shipping Height

    252 , 25.2 cm

  • Shipping Width

    138 , 13.8 cm

  • Shipping Depth

    442 , 44.2 cm

  • Color

    Black

  • Master Carton Units

    2.0

  • Master Carton Weight

    15.94

  • Units per Pallet

    48.0

  • SCC Codes

    1073130426688 1

Environmental

  • Operating Environment

    0 – 40 °C

  • Operating Relative Humidity

    0 – 95 %

  • Operating Elevation

    0-3000 meters

  • Storage Temperature

    -15 – 45 °C

  • Storage Relative Humidity

    0 – 95 %

  • Storage Elevation

    0-15000 meters

  • Audible noise at 1 meter from surface of unit

    45.0 dBA

Conformance

  • Approvals

    A-tick, C-tick, CE, GOST, GS Mark

  • Equipment protection policy

    Lifetime : 200000 AUD, Lifetime : 150000 Euros, Lifetime : 75000 GBP

  • Standard warranty

    2 years repair or replace, 3 years repair or replace for European Union countries

Sustainable Offer Status

  • RoHS

    Compliant

  • REACH

    REACH: Contains No SVHCs

  • PEP

    Available in Documentation tab

  • EOLI

    Available in Documentation tab