APC Symmetra LX 8kVA Scalable to 8kVA N+1 Tower, 220/230/240 or 380/400/415V SYA8K8I-0
APC Symmetra LX 8kVA Scalable to 8kVA N+1 Tower, 220/230/240 or 380/400/415V SYA8K8I-53324

APC Symmetra LX 8kVA Scalable to 8kVA N+1 Tower, 220/230/240 or 380/400/415V SYA8K8I

APC Symmetra LX 8kVA Scalable to 8kVA N+1 Tower, 220/230/240 or 380/400/415V
SYA8K8I

Povpraševanje
Šifra: SYA8K8I Kategorija: Oznaka:

SYA8K8I Features

APC Symmetra LX 8kVA Scalable to 8kVA N+1 Tower, 220/230/240 or 380/400/415V

  • Removable input/output wiring tray
    Allows quick and easy installation and maintenance of the UPS.

Symmetra Features & Benefits

Serviceability
  • Predictive failure notification
    Provides early-warning fault analysis ensuring proactive component replacement.
  • Automatic self-test
    Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Audible alarms
    Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
  • User-replaceable intelligence modules
    Enables simple upgrades and replacements of the Intelligence Modules.
  • Disconnected battery notification
    Warns when a battery is not available to provide backup power.
  • User-replaceable power modules
    Enables simple upgrades and replacements of the Power Modules.
  • User-replaceable batteries
    Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Protection
  • Safety-agency approved
    Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Input power factor correction
    Minimizes installation costs by enabling the use of smaller generators and cabling.
  • Cold-start capable
    Provides temporary battery power when the utility power is out.
  • Frequency and voltage regulation
    Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • Resettable circuit breakers
    Enables a quick recovery from overload events.
  • Power conditioning
    Protects connected loads from surges, spikes, lightning, and other power disturbances.
  • Generator compatible
    Ensures clean, uninterrupted power to the loads in the event of an extended power outage
Marketing Features
  • Modular, Scalable, Redundant Architecture future proof initial investment, improves equipment availability, and simplifies maintenance.
    Symmetra LX’s redundant N+1 architecture enables the unit to withstand a failures of an intelligence module, battery or power module. Modules are easily replaceable in the field. Customers can add additional power modules or batteries after initial equipment purchase to accommodate loads of up to 16 kVA.
  • Low operating and maintenance costs with proven reliability and intelligent battery management.
    Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
  • Avoids costly power problems by keeping your IT equipment and data protected and available.
    Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
  • Save time with easy and convenient remote accessibility.
    Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
  • Peace of mind that comes with complete equipment compatibility and reliability of a market leader.
    Safety agency tested and approved means that you can deploy Symmetra with confidence that they meet or exceed the industry’s most rigorous standards.
Availability
  • Modular design
    Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
  • Battery modules connected in parallel
    Delivers higher availability through redundant batteries.
  • Configurable for N+1 internal redundancy
    Provides high availability through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.
  • Power Modules connected in parallel
    Enhances availability by allowing immediate, seamless recovery from isolated module failures.
  • Hot-swappable batteries
    Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Hot-swappable intelligence modules
    Ensures clean, uninterrupted power to protected equipment during Intelligence Module replacement.
  • Hot-swappable power modules
    Ensures clean, uninterrupted power to protected equipment during Power Module replacement.
  • Redundant Intelligence Modules
    Provides higher availability to the UPS connected loads by giving redundant communication paths to critical UPS functions.
  • Automatic restart of loads after UPS shutdown
    Automatically starts up the connected equipment upon the return of utility power.
  • Automatic internal bypass
    Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Scalability
  • Field-replaceable power distribution panel
    Ensures compatibility with equipment that has different plug types.
  • Scalable power capacity
    Reduces UPS over-sizing costs today by allowing quick power upgrades, within the same footprint, later.
  • Programmable frequency
    Ensures compatibility with different input frequencies.
  • Scalable runtime
    Allows additional run time to be quickly added as needed.
  • Plug-and-Play external batteries
    Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Manageability
  • Network manageable
    Provides remote power management of the UPS over the network.
  • Manageable external batteries
    Reduces preventative maintenance service needs by monitoring the health and status of the external batteries and their expected runtime.
  • LCD display
    Alpha-Numeric Display which displays system parameters and alarms.
  • InfraStruXure Manager Compatible
    Enables centralized management via the APC InfraStruXure Manager.
  • SmartSlot
    Customize UPS capabilities with management cards.
  • Intelligent battery management
    Maximizes battery performance, life, and reliability through intelligent, precision charging.

Output

  • Output power capacity

    5.6 KWatts / 8.0 kVA

  • Max Configurable Power (Watts)

    5.6 KWatts / 8.0 kVA

  • Nominal Output Voltage

    230V

  • Output Voltage Note

    Configurable for 220 : 230 or 240 nominal output voltage

  • Efficiency at Full Load

    90.0 %

  • Output Voltage Distortion

    Less than 5% at full load

  • Output Frequency (sync to mains)

    47 – 63 Hz

  • Output Frequency (not synced)

    60Hz +/- 0.1% for 60Hz nominal, 50Hz +/- 0.1% for 50Hz nominal

  • Other Output Voltages

    220, 240

  • Load Crest Factor

    up to 5 : 1

  • Topology

    Double Conversion Online

  • Waveform type

    Sine wave

  • Maximum Output Current

    36

  • Output Connections
    (1) Hard Wire 3-wire (H N + G) (Battery Backup)
  • Bypass

    Internal Bypass (Automatic and Manual)

Input

  • Nominal Input Voltage

    230V , 400V 3PH

  • Input frequency

    45 – 65 Hz (auto sensing)

  • Input Connections

    Hard Wire 3 wire (1PH+N+G), Hard Wire 5-wire (3PH + N + G)

  • Input voltage range for main operations

    155 – 276 (1:1), 290 – 480 (3:1) V

  • Efficiency at Full Load

    90.0 %

  • Input Total Harmonic Distortion

    Less than 7% for full load

  • Other Input Voltages

    220V, 240V, 380V, 415V

Batteries & Runtime

Communications & Management

  • Interface Port(s)

    DB-9 RS-232 , RJ-45 10/100 Base-T , Smart-Slot

  • Pre-Installed SmartSlot™ Cards

    AP9631

  • Control panel

    Multi-function LCD status and control console

  • Audible Alarm

    Audible and visible alarms prioritized by severity

  • Emergency Power Off (EPO)

    Yes

  • Available SmartSlot™ Interface Quantity

    1

Physical

  • Maximum Height

    671 , 67.1 cm

  • Maximum Width

    483 , 48.3 cm

  • Maximum Depth

    726 , 72.6 cm

  • Net Weight

    201.82 kg

  • Shipping weight

    229.56 kg

  • Shipping Height

    914 , 91.4 cm

  • Shipping Width

    599 , 59.9 cm

  • Shipping Depth

    997 , 99.7 cm

  • Color

    Black , Silver

  • Units per Pallet

    1.0

Environmental

  • Operating Environment

    0 – 40 °C

  • Operating Relative Humidity

    0 – 95 %

  • Operating Elevation

    0-3000 meters

  • Storage Temperature

    -15 – 45 °C

  • Storage Relative Humidity

    0 – 95 %

  • Storage Elevation

    0-4500 meters

  • Audible noise at 1 meter from surface of unit

    62.0 dBA

  • Online thermal dissipation

    2762.0 BTU/hr

Conformance

  • Approvals

    C-tick, CE, EN 50091-1, EN 50091-2, EN 55022 Class A, EN 55024, EN 60950, GOST, IEC 60950, VDE

  • Standard warranty

    2 years repair or replace

Sustainable Offer Status

  • RoHS

    Compliant