- Intra-system balancing
- Flame retardant system to UL94V-0
- Good high temperature performance
- High cycle times and long service life
- Safe Lithium Iron Phosphate Technology
- Thousands of cycles, under normal conditions
- High energy density and conversion efficiency
- Environmental Friendly, without any heavy metals
- Complete with Battery Management System built-in
- Can use most standard VRLA chargers for this system
- Low self discharge rate of 2 years before required recharging
- Easy installation, can be in 19-inch standard cabinet or be wall-mounted
- Built-in automatic protection for over-charge, over-discharge & over-temperature conditions
|
Item |
Specification |
|
Model |
LFeLi-48200MB16 |
|
Rated Capacity (5HR) |
200 Ah |
|
Nominal Voltage |
51.2 V |
|
Discharge Ending Voltage |
43.2 V |
|
Charging Limited Voltage |
57.6 V |
|
Max. Charging Current |
150 A |
|
Max. Continue Discharging Current |
150 A |
|
Weight |
Approx. 85 Kg |
|
Display |
With display screen |
|
Protocol |
CANBUS/ MODBUS |
|
Parallel Connection |
Parallel connection is optional (up to 15P). |
|
Dimensions (W*D*H) mm (inches) |
442 (17.40″) * 500 (19.68″) * 244 (9.61″) |
|
Cell |
3.2V 200Ah |
|
Design life |
More than 20 years |
|
Cycle Life |
More than 3500 cycles at 100% DOD. |
|
IP Class |
Ip31 |
|
Outer Package Material |
Black bake lacquer steel case (battery rack or cabinet is optional) |
|
Operating Temperature |
Charging: 0 to +60℃ Discharging: -20 to +60℃ Storage: -20 to +60℃ |
Discharge Table
|
Constant Current Discharge Table (Amperes) at 25℃ |
||||||
|
Model |
Voltage Time |
75 min |
2 h |
3 h |
5 h |
10 h |
|
LFeLi-48200TCAN |
End of discharge voltage 43.2 V |
150A |
98 A |
66 A |
40 A |
20 A |
|
Constant Power Discharge Table (Watts) at 25℃ |
||||||
|
Model |
Voltage Time |
75 min |
2 h |
3 h |
5 h |
10 h |
|
LFeLi-48200TCAN |
End of discharge voltage 43.2 V |
7600W |
4990W |
3398W |
2016 W |
1017W |
